Switching your radio on the first time
Power Supply
1. Connect the power adaptor to the DC socket of the radio and plug in the other end to the
wall socket.
2. Extend the Antenna as far as it can go
;
3. The LCD backlight will light up. The radio will automatically show:
4. The first time you use this radio, it will start scanning the DAB radio stations automatically.
5. Once the scan is finished, it will display the number of radio stations received.
Note:
Always make sure the antenna is extended as much as possible to get the maximum
signal strength and the best possible sound quality.
6. To explore the stations that have been found, you need to press either the ‘Up’ or ‘Down’
keys, it will skip to the next found stations. When you find a radio station that you would like
to listen to, then push down the Rotary knob to select the station. If you don’t press the
select key, the display will revert back to original station after 6 seconds.
Memory
When you start up the radio again, the radio plays the same mode and same station as last
listened.
Adjusting the volume
Adjust the Rotary knob at the front to increase and Decrease the volume.
Changing radio mode (DAB/FM/Bluetooth)
Select the DAB/FM/Bluetooth mode from the menu to select the DAB or FM or Bluetooth mode.
DAB
3
