5
CONTROL PADS ON THE DEHUMIDIFIER
Other Features
Bucket Full Light
Glows when the bucket is ready to be emptied.
When frost builds up on the evaporator coils, the
compressor will cycle off and the fan will continue
to run until the frost disappears.
Auto Defrost
Wait 3 minutes before resuming operation
After the unit has stopped, it cannot be
restarted
immediately in the first 3 minutes.
This is to prevent
damage to the unit.
Operation will automatically
start after 3 minutes.
Setting the Timer
While the unit is on, press the TIMER button
to initiate the AUTO STOP program, indicated
by the TIMER OFF light. Press again to initiate
the AUTO START program, indicated by the
TIMER ON light.
While the unit is off, press the TIMER button
to initiate the AUTO START program, indicated
by the TIMER ON light.
Press or hold the UP or DOWN button to change
the Auto Timer by half hour increments up to 24
hours. The display will show the time remaining
until start/stop.
The selected time will show for 5 seconds and
then the system will automatically revert back to
displaying the previous humidity setting.
Turning the unit ON or OFF at any time or adjusting
the Timer setting to 0.0 will cancel the Timer.
When the AUTO START & STOP times are set,
the TIMER ON/OFF indicator lights up to show
that the Timer is on.
Check filter feature
The system counts every time the fan motor operates.
when the accumulated operation time achieves 250 hours
or more, the check filter light will flash to remind that the
the filter needs cleaning. After finishing cleaning and putting
back the air filter, be sure to press the filter button to reset
the clean filter counter and turn off the indicator light.
Display
Shows the set humidity level from 35% to 85% or auto
start/stop time (0~24) while setting, then shows the actual
±
(
RH(Relative Humidity) to 90%RH(Relative Humidity).
Error Codes and Protection Code:
AS
- Humidity sensor error: Unplug the unit and plug it back
in. If error repeats, call for service.
ES
- Temperature sensor error: Unplug the unit and plug it
back in. If error repeats, call for service.
P2
- Bucket is full: Empty the bucket.
Auto Shut Off
The
shuts off when the bucket is
full, or when the bucket is removed or not placed
in the proper position. When the set humidity is
reached, the unit will be shut off automatically.
For some models, the fan motor will continue
operating.
dehumidifier
Auto-Restart
If the unit shuts off unexpectedly due to a
power outage
,
when the power resumes.
EC
- Unit
malfunction
: Please make sure
that
the
environment temperature is
within the standard operating
temperature in the manual. If the current temperature is
working, call for service.
within the standard operating temperature and it still isn’t
6
Timer
button
Press to initiate the Auto start and Auto stop feature,
in conjunction with the and buttons.
E3
- Unit malfunction: Unplug the unit and plug it back in. If
error repeats, call for service.
Eb
- Bucket is
not present or not in right position: Remove
the bucket and put back in the right position.
it will restart with the previous function setting automatically
%
0
3
f
o
e
g
n
a
r
a
ni
l
e
v
el
y
ti
di
m
u
h
m
o
o
r
)
y
c
a
r
u
c
c
a
%
5
