- 4 -
Step #4
Tools Needed: Rubber Mallet, cordless drill with Phillips bit.
#1:
Lay the Anti-Swim Barrier and
the Anti-Swim Barrier Extension on
a flat surface.
#2:
Position the Anti-Swim Barrier
Extension over the Anti-Swim Bar-
rier so that the length of the Barrier
matches the length from the top
tread to the bottom tread of the
ladder. Attach with two 1/4 - 20 x 1
1/4” bolts and two 1/4- 20 hex nuts.
#3:
Using the rubber mallet, tap
the Anti-Swim Barrier into place.
#4:
Evenly space the foam
adhesive pads to the Barrier.
#1:
Flip entire ladder assembly
onto its side. Slide the two remaining
Side Rail assemblies through
the two openings on the tabbed end
of the Platform. Using the rubber
mallet, tap down on the Platform
until it is seated against the lugs
on the Side Rails. IT MAY REQUIRE SEVERAL HARD BLOWS WITH
A RUBBER MALLET TO SEAT THE PLATFORM ALL
THE WAY DOWN
ONTO LUGS.
Step #5
Tools Needed: Rubber Mallet, cordless drill with Phillips bit.
Step #5 continued
