- 3 -
Step #3
continued
#2:
Lay one of
the Side Rail
assemblies on a
flat surface.
Matching the
tabs in the Fixed
Ladder Treads
to the notches
in the Side Rail
assembly, use
the rubber mallet to tap the treads
into place.
#3:
Placing your foot on the Side
Rail to hold it steady, use the rubber
mallet to tap down the Fixed Ladder
Treads until they are firmly seated
in the Side Rail.
#4:
Place the opposite Side Rail
assembly on top of the Fixed
Ladder Treads so that the notches
and tabs align and tap it into place.
Placing your foot on the Side Rail
to hold it steady, use the rubber
mallet to tap down the Fixed Ladder
Treads until they are firmly seated
into both Side Rails.
#5:
With ladder assembly on edge,
position one of the remaining Fixed
Ladder Treads so that the tabs
align with the notches at the bottom
of the Side Rail assemblies and tap
in with the rubber mallet until the
tread is properly seated.
#6:
Using the openings opposite
the tabbed end, slide the Platform
over the two Handrails.
#7:
Using the rubber mallet, tap
the Platform down until seated on
the lugs on the Side Rails.
