Oce VarioPrint i Series Operation Manual Download Page 97

Page: 97 / 402

Overrule the set image shift for transaction print jobs

The transaction setup has attributes to define the image shift. (

) From the control panel you can overrule the image shift definition of a transaction

setup. This is useful when you notice that variable data, such as names or addresses, must be
better aligned on the page.

[104] Change image shift of transaction print jobs on control panel

1. Touch [System]

→

[Transaction].

The [Image shift] section shows the image shift as defined in the active transaction setup.

2. Bring transaction printing offline. (

Activate the transaction printing mode on page 95

)

3. Make the changes in the [Image shift] section.
4. Bring transaction printing online.

Overrule the set image shift for transaction print jobs

Chapter 6 - Transaction printing

Summary of Contents for VarioPrint i Series



















































































































































































































































































































































































































Search results

Summary of Contents for VarioPrint i Series

Reviews:

Related manuals for VarioPrint i Series

Brands by name

Popular brands

Oce VarioPrint i Series, Operation Manual

Search results

Summary of Contents for VarioPrint i Series

Reviews:

Related manuals for VarioPrint i Series

Brands by name

Popular brands