Oce VarioPrint 6000 series, User Manual

Page: 31 / 66

31
Lock the clean unit (right)
Lock the clean unit (right)
Introduction
This procedure is only intended for key operators who received the special
maintenance training.
When to do
After you replaced the cleaners *** 'Replace the cleaners' on page 16 ***, you
must restart the machine. If you accidentally forgot to lock a clean unit after
you replaced the cleaners, the machine will detect this during the initialization.
Then the operator panel will display this maintenance task.
Required tools
D-wrench (supplied with the machine)
Socket wrench 10 (supplied with the machine)
Lock the clean unit
1.
Use socket wrench 10 to loosen the bolt of the front doors (1).
2.
Open the front doors (2).
[27]
[27] Open the front doors
1
2