Oce VarioPrint 6000 MICR+ series, User Manual

Page: 23 / 44

4.
Check the [MICR mode (if licensed)] box.
NOTE
When you select [IPDS], you can also activate the [Output recovery] setting by putting a check
mark in the box (see
Output recovery in case of an error on page 17 ).
5.
Go to [Transaction printing] - [Setups], select the required Setup, then click [Load].
6.
On the operator panel, activate the[Transaction printing mode] function in the [System] view (see
Activate transaction printing on page 20
).
NOTE
You can see that you activated the [MICR mode (if licensed)] on the operator panel in the
[System] view - [Transaction] section and in the remote viewer.
Activate the MICR mode
Chapter 2 - Transaction printing 23