Oce VarioPrint 2045-65 NC, Job Manual

Page: 53 / 213

The print function 51
Start a print job that uses a profile
Introduction
To start a print job that uses a profile, select a listed profile or make a new
profile (see ‘
Create a profile ’ on page 48 ).
Starting a print job with a profile
1
Open the 'Properties' dialog box (see ‘ Introduction ’ on page 46 ).
2
Make sure that the 'Job' tab is selected.
3
Click 'Profiles' .
Note:
There are more tabs with a 'Profiles' button.
4
Select a profile in the 'Profile' drop-down list.
[25] Select a profile
[25] Select a profile