User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
15
AP-40104 - Revision 1.1 – 12/03/2008
3 INSTALLATION PROCEDURE
3.1 INSTALLING THE FRONT TENSIONING SYSTEM
Step 1 :
Loosen the four screws fixing the right bracket with the driving mechanism.
Step 2 :
Mount the right bracket (1) to the right leg (2) of the stand using 2 “M5x12” screws (3).
For CS9060 and CS9160
On the CS9050, the right bracket consists out of 2 parts.
•
First slide the closing bracket (1) over the stand (2), make sure that the closing bracket is pushed
properly against the stand.
•
If the closing bracket is positioned properly, slide the support bracket onto the closing bracket.
Make sure that the support bracket its flange is properly positioned against the closing bracket and the
stand.
•
When it is positioned correctly, fix the support bracket (3) onto the closing bracket using 3 “M5x12” (4)
screws.
For CS9050
1
2
3
4