Oce TCS500, Self Support Manual

Page: 15 / 26

What to do when the system indicates
a defective printhead
Use the Replace printhead wizard to change a defective
printhead
When to do
The system indicates the defective printhead. Only replace the printhead indicated by
the system.
Chapter 10 of the user manual includes complete information about how to replace a
defective printhead.
Before you begin
During the 'Replace printhead' wizard, the system does a calibration. The calibration is
only possible on of the following media types.
■
Draft paper
■
Standard paper
■
Premium coated paper
■
Bond
■
Coated bond
■
Matt photo paper
■
High gloss photo paper
■
Deluxe bond
■
Recycled plain paper
■
Plain paper coated
How to start the Replace printhead wizard
Attention:
Only open the top cover when the wizard prompts you.
1.
Press the on-line / off-line key (key 4 on the folded cover) to set the printer off-line.
2.
Press the lower softkey for 'Replace printhead' (key 6 on the folded cover) to enter the
wizard.
Chapter 1 - Self support tips (GB) 15
Use the Replace printhead wizard to change a defective printhead