Oce PlotWave 350, User Manual

Page: 7 / 22

#
Ignoring this caution could cause injury to skin; see also
the section "Actions in response to troubles". Caution
Hot
Whenever this label is affixed to parts of the machine that
are accessible to the user, a remark can be found in the user
documentation, explaining the potential hazard for which
the user is warned or cautioned. The user is urged to consult
the user documentation in order to understand the safety
risk and learn how to avoid damage or injury. Warning
Disassemble and modification
Warning
• Do not remove covers and panels which are fixed to the machine. Some machines
have a high-voltage component or a laser beam source inside that could cause an
electrical shock or blindness.
• Do not modify this machine, because this could cause a fire, electrical shock or
breakdown. If the machine contains a laser, the laser beam source could cause blindness.
Caution
• Do not carry out maintenance activities for other components and maintenance ma-
terials than the components and materials that are mentioned in the user manual.
• Do not place any liquids on the machine.
• Do not open any door while the machine starts up or runs, unless the operator panel
displays a message that asks you to open one or more doors.
• Use maintenance materials or other materials for their intended purpose only.
• To avoid any risk, only properly qualified and trained service technicians are allowed
to modify the machine.
• Do not bridge any mechanical or electrical circuit breakers.
Note
• Keep maintenance materials away from children.
Power cord
Warning
• Do not scratch, abrade, heat, twist, bend, place a heavy object on or cause any other
damage to the power cord. The use of a damaged power cord (exposed core wire,
broken wire, for example) could result in a fire or breakdown. If you find any of these
conditions, immediately turn OFF the power switch and unplug the power cord from
the power outlet. Then call your authorized service representative.
• Do not use an extension lead to connect the machine.
• Only use the mains connector cable that was supplied with the machine.
Chapter 1 - Instructions for safe use 7
Instructions for safe use