Oce PlotWave 350, User Manual

Page: 14 / 22

appliance is put on the market after August 13, 2005. Reference: Directive 2002/96/EC.
Contact your local Océ organization for more information.
RoHS (China only)
The Environmental Protection Use Period (EPUP) applicable for the printing system
designated for deliveries to the People's Republic of China is 20 years. This EPUP, which
does not include consumables or expendables, does not affect any warranty that is provided
for the system and may not be construed or interpreted as a separate guarantee for the
printing system.
ENERGY STAR® (all countries)
Océ has joined the ENERGY STAR® Program of the United States Environmental
Protection Agency (EPA). The purpose of the ENERGY STAR® Program is to promote
the manufacturing and marketing of energy-efficient equipment, thereby potentially re-
ducing combustion-related pollution. Using the energy management features outlined
below prevents unnecessary power consumption, which helps to prevent air pollution
from electricity generating plants and saves money on your utility bills. As an ENERGY
STAR® Partner, Océ has determined that Océ PlotWave 350 meets the ENERGY
STAR® criteria for energy efficiency laid down in the ENERGY STAR ® Program Re-
quirements for Imaging Equipment (Version 1.2)
Energy consumption (all countries)
In order to limit energy consumption during times of non-use the Océ PlotWave 350
has a Sleep mode during which the power level is reduced. The value for the Sleep mode
is listed in the Product Safety Data Sheet.
Power modes and delay times
The energy consumption and efficiency are influenced both by the product technology
and by the settings chosen by the user, especially the delay times that are selected to enter
reduced power states. The following delay times have been pre-set.
Power modes and delay times
#
Default delay time (minutes) Operational mode
60 minutes (range 5 - 240 minutes) Sleep
The modes above are automatically entered after the Default Delay Time has elapsed;
counting from the moment the last print has been produced. These settings are recom-
mended and for most users ensure both ease of use and low energy consumption. Between
brackets are the minimum and maximum values. The Delay Times can be changed.
Shorter delay times will reduce energy consumption even further, but may cause longer
Chapter 2 - Regulation notices 14
Regulation notices