1-5
1. Printer Settings (15 ppm copier)
Menu
number
P47
P48
P49
P50
P51
P52
P55
P56
P61
P62
P70
Item
Wide A4 ON/OFF
Increases the printing area on A4 size paper.
Printing orientation (parallel interface)
Printing orientation (network interface)
Smoothing ON/OFF
Allows a printing resolution of an interpolated 2400
dpi x 600 dpi through the smoothing process.
Draft Mode ON/OFF
Allows printing in a toner-saving mode. This mode is
especially suited for test pages, etc., where high
printing quality is not required.
Printing resolution
RAM disk ON/OFF
RAM disk size
Sets the amount of memory that will be used as a
RAM disk. The maximum size that can be selected
is the total amount of memory installed minus the
amount used by the system (9 MB).
A4 & Letter usage ON/OFF
Allows both A4 and letter size paper to be utilized as
though they are the same size.
Bypass mode
If “First” (setting: 2) is selected here and there is
paper set in the Multi-Bypass, paper feed will be
accomplished from the Multi-Bypass.
Force-print time-out
If “000” seconds is selected here, successive pages
will not be printed until they are manually force-
printed (by pressing the Start key in the printer
mode).
Available settings
(1) On
(2) Off
(1) Portrait
(2) Landscape
(1) Portrait
(2) Landscape
(1) On
(2) Off
(1) On
(2) Off
(1) 300 dpi
(2) 600 dpi
(1) On
(2) Off
01 - 99 (MBytes)
(1) On
(2) Off
(1) Cassette
(2) First
000 - 495 (sec.)
Remarks
Available only when the Network
Card is installed.
At least 16 MB of additional memory
(option) must be installed.
