Oce CS9360, User Manual

Page: 49 / 146

CS9360 User’s Guide
3-49
a. When the printing result is OK; You do not need perform Adjust Print. The procedure for
Adjustment is complete.
b. When the printing result is
×
: you need to perform Alignment.

Perform rough adjustment when the misalignment is big.
3.6.1.2 Standard Rough Adjustment Pattern

Perform micro adjustment when the misalignment is small.
3.6.1.3 Standard Micro Adjustment Pattern
Standard Rough Adjustment Pattern
Check the confirmation pattern, and when the misalignment is big, perform rough adjustment.
Print a rough adjustment pattern and register the setting value.
Step 1:
Display the Adjust Print menu in the same way as in step 2 of “3.6.1.1 Standard Confirmation
Pattern”
Step 2:
Press [+] or [-] to select “Adj.2: Rough Pattern”.
Step 3:
Press [Enter].

The printer starts printing a rough adjustment pattern.

The pattern images are printed on both paper edges and the centre of the media.
Step 4:
Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 11 that is not out of alignment.