Oce CS550 Pro, User Manual

Page: 42 / 56

2.
Check the measurement options and click 'Measure'.
[43] Measurement button
3.
Check the spectrometer and click 'OK'.
[44] Spectrometer ready?
4.
Follow the instructions in the EFI Spectrometer window precisely.
Perform the following actions per colour.
■
Position the spectrometer at the blinking red cross above the column with coloured
patches.
■
Hold down the spectrometer button and wait for the beep.
■
Scan the column with patches slowly.
[45] Measurement instructions
5.
Click 'OK'.
[46] Measurement successful?
6.
Apply the calibration.
■
Check 'Apply to all calibration sets' to use this calibration for all media.
Chapter 4 - Printer calibration 42
4.3 Calibrate the EFI controller