manualshive.com logo in svg

Oce CS193, User Manual

Share
Download
Oce CS193 User Manual Download Page 470

12

Utility mode

12-26

CS193/CS173/CS163

*

1

 Appears when finisher is installed with the saddle stitcher attached.

*

2

 Appears when finisher is installed with the punch kit attached.

!

Detail 

For the procedure on adjusting the printer, refer to "Printer Adjustment" on page 12-41.

For the procedure on adjusting the finisher, refer to "Finisher Adjustment" on page 12-46.

For the procedure on adjusting the color registration, refer to "Color Registration Adjust" on 
page 12-52.

For the procedure on adjusting the gradation levels, refer to "Gradation Adjustment" on page 12-54.

[Finisher Adjustment] appears only when an optional finisher is installed.

Only "Black Image Density" is available for OHP transparencies.

List/Counter

Gradation 
Adjustment

Image Stabiliza-
tion Only

When adjusting the gradation levels, first press 
the [Start] key to perform image stabilization.

-

Copy

Adjust the gradation levels if there are changes in 
the color gradations of the print image. The ad-
justment is made with stress on increasing the 
number of images stored in the memory.

-

Printer (Gradation)

Adjust the gradation levels if there are changes in 
the color gradations of the print image. The ad-
justment is made with stress on the gradations in 
images.

-

Printer (Resolu-
tion)

Adjust the gradation levels if there are changes in 
the color gradations of the print image. The ad-
justment is made with stress on the reproducibility 
of text and lines.

-

Line Detec-
tion

Prior Detection 
Setting

Select whether or not a warning appears when the left partition glass is dirty, 
and specify the dirt detection level. The dirt detection operation is performed 
before and after scanning an original using the ADF.

Detection While 
Feeding Setting

Specify the level at which dirt is detected when scanning an original using the 
ADF. If "Do Not Remove" is selected, the operation to remove lines is not per-
formed.

Parameter

Description

Default Setting

Parameter

Description

Management List

Job Settings List

The machine settings can be printed.

Paper Size/Type Counter

Store combinations of paper sizes and paper types to be 
counted.

Summary of Contents for CS193




































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands