Scanner operation
23
Inserting a document
You can insert a document into the scanner right or center-aligned, using
measurements in inches, millimeters, or scanner units. You make these settings
in the Océ Scan software.
Insertion slot
■
A ruler at the top of the insertion slot give the width of a right-aligned
document. You can slide out this ruler to switch to or from millimeters and
inches.
■
Markers at the bottom of the insertion slot help you center-align standard size
documents for scanning.
Note:
It is preferable to center-align a document to position it
symmetrically on the feed rollers during a scan.
■
You can also measure a document in scanner units.
Scanner units Media size
Document width
1.4
Minimum (A5)
6.0"
152 mm
2
A-Size (letter) and near A4
8.5"
216 mm
2.6
B-Size (11")
11.0"
280 mm
2.8
A3 (297 mm)
11.9"
302 mm
3
Near A3 and near B-Size
12.7"
323 mm
3.9
A2 (420 mm)
16.5"
420 mm
4
C-Size and near A2
17.0"
430 mm
5.2
D-Size (22")
22.0"
560 mm
5.5
A1 (595 mm)
23.3"
592 mm
6
Near A1 and near D-Size
25.4"
646 mm
7.8
A0 Portrait (841 mm)
33.1"
840 mm
8
E-Size and near A0
34.0"
862 mm
11.2
E-Size Landscape
44.0”
1118 mm
11
A0 Landscape
46.8”
1189 mm
11.8
Maximum scan width
50.0"
1270 mm
Maximum media size handled
51.5"
1310 mm
Summary of Contents for CS 4040
