Oce arizona 1240 GT, User Manual

Page: 38 / 212

Printer Interface Software
Introduction
The printer software is displayed on the LCD monitor. The interface has seven main modules that
are accessed by tabs located at the bottom of the display. Click on these tabs to access the
modules. Print Job Control is the default module displayed when the software has finished
loading after the printer is switched on or reset.
The Print Job Control display is divided into functional and status areas. The functional areas
support all operator input necessary to operate, maintain and service the printer. The status areas
are used to report printer status.
Onscreen Keyboard & Numeric Keypad
A mouse is used as the input device to navigate the menu-based interface. For operations that
require operator input, the mouse is used to select either numeric characters from a virtual
keypad or alphanumeric characters from a virtual keyboard. These virtual input screens are
displayed on the interface LCD monitor when data entry is required.
Virtual Keypad
Operator Interface Module Tabs
Interface Modules Tabs
Component Function
Print Job Control
(Print tab) Provides management of all aspects of working with print jobs. It also
controls some features of the printer and provides access to Roll Media
print controls (if that option is installed).
Ink System
(Ink tab) Provides various statistics about the inks. In the case of expired ink, the
ink system is disabled. It can be re-set in the module. You can bypass
the expired state within a 30 day grace period (for example, if you
know you don't need that color in the current print job) but it is in your
best interest to replace any expired ink bags.
4
Printer Interface Software
38 Chapter 4 - How to Navigate the User Interface
Océ Arizona 1200 Series