Oce arizona 1240 GT, User Manual

Page: 10 / 212

Printer Specifications
Introduction
Your Océ Arizona 1200 Series printer is capable of producing large format images on various
rigid and flexible media. The printers consist of a flatbed vacuum table and moving gantry. Media
is held flat and stationary on the vacuum table during printing. The gantry contains a carriage
that sweeps across the table as the gantry moves in steps along the length of the table to print an
image on the media. A Roll Media Option is available to facilitate printing on roll media.
NOTE
All specifications in this document are subject to change without notice.
Specifications
Feature Specification
Printing Technology Piezoelectric inkjet with Océ VariaDot™ imaging technology "
Maximum Media Size GT models: 2.5m (98.4") x 1.25m (49.2")
XT models: 2.5m (98.4") x 3.08m (121.3")
Media Thickness Maximum: 50.8 mm (2.0")
Maximum Print Size GT models: 2.51m (98.8") x 1.26m (49.6")
XT models: 2.51m (98.8") x 3.09m (121.6")
Media Weight Maximum: 34 kg/m² (7 lbs/ft²)
Nozzle Drop Volume: Variable droplet sizes: 6 to 42 picolitres
User Interface LCD flat-panel monitor and mouse on a user positioned podium.
Curing System UV curing lamps with variable power settings.
Power Requirements
Refer to the PSDS available
from the Océ Downloads
website: http://glob-
al.oce.com/support/. Dual Inlets
200-240Vac
50/60Hz
Circuit Breaker: North America 20A, European Union 16A.
Compressed Air Pressure (max): 827 kpa (120 psi)
Peak flow: 113 liters/min (4 cfm) at 690 kpa (100psi)
Environmental Conditions Temperature: 18ºC to 30ºC (64ºF to 86ºF).
Relative humidity: 30% to 70% (Non-condensing)
Room Ventilation Rate (minimum): 1200m³/hr
BTU Output GT models: 14,000 BTU per hour (4100 watts) under continuous
operation.
XT models: 17,000 BTU per hour (4980 watts) under continuous
operation.
Hardware Interface USB, Ethernet TCP/IP, 100 base-T (or Gigabyte, if supported by the
local network).
Image Processing Software ONYX
®
Thrive™ 12 (421 configuration or greater recommended)
ONYX
®
ProductionHouse™ 12 (available, not recommended)
Printer Specifications
10 Chapter 1 - Introduction
Océ Arizona 1200 Series