Occhio Sento, Mounting Instructions

Page: 39 / 48

37
Replacing the bulb
If necessary, loosen the fixing screw and
remove the reflector head (see p. 14).
Caution:
Switch off the lamp before replacing
the reflector head and allow it to cool
down for at least
one hour.
$
Hold the bulb with a soft cloth and remo-
ve it from the socket.
Insert the light source into the socket of
the socket holder.
Always use a soft cloth when handling
the bulb glass. Wipe off any fingerprints
before switching on.
The power of the bulb must be mat-
ched to the lamp body. The lowest
specification is the most important.
Fitting the appropriate bulb is described
separately in the enclosed instructions for
the respective lamp.
Slide the Sento reflector head onto
the socket holder. It clicks into its end
position.
If necessary, slightly tighten the fixing
screw.