background image

2

©2022 OBSIDIAN CONTROL SYSTEMS

  all  rights  reserved.  Information,  specifications,  diagrams, 

images, and instructions herein are subject to change without notice. Obsidian Control Systems logo 
and identifying product names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright 
protection claimed includes all forms and matters of copyrightable materials and information now allowed 
by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks 
or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ brands 
and product names are trademarks or registered trademarks of their respective companies.

OBSIDIAN CONTROL SYSTEMS

 and all affiliated companies hereby disclaim all liabilities for property, 

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss 
associated with the use or reliance of any information contained within this document, and/or as a result 

of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this 

product.

ELATION PROFESSIONAL B.V.

Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 
this device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS

This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This device uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the included instructions, may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular installation. If this device does cause harmful 

interference to radio or television reception, which can be deter- mined by turning the device off and on, 

the user is encouraged to try to correct the interference by one or more of the following methods:

• 

Reorient or relocate the device.

• 

Increase the separation between the device and the receiver.

•  Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the environment. Please turn off all electrical products 

when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment 
from power when not in use. Thank you!
Document Version: An updated version of this document may be available online.
Please check 

www.obsidiancontrol.com

 for the latest revision/update of this document before beginning 

installation and use.

Date

Document Version

Note

02/23/2022

1

Preliminary Release

Summary of Contents for NX1














Reviews: