OBSIDIAN CONTROL SYSTEMS Netron RDM10, Installation Manual

Page: 2 / 15

©2019 OBSIDIAN CONTROL SYSTEMS
all rights reserved. Information, specifications, diagrams, images, and
instructions herein are subject to change without notice. Obsidian Control Systems logo and identifying product
names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information now allowed by statutory or judicial law or
hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their
respective companies and are hereby acknowledged. All non-ADJ brands and product names are trademarks
or registered trademarks of their respective companies.
OBSIDIAN CONTROL SYSTEMS
and all affiliated companies hereby disclaim any and all liabilities for property,
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss
associated with the use or reliance of any information contained within this document, and/or as a result of the
improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.
OBSIDIAN CONTROL SYSTEMS B.V.
Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This
device uses and can radiate radio frequency energy and, if not installed and used in accordance with the
included instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this device does cause harmful interference to radio
or television reception, which can be deter- mined by turning the device off and on, the user is encouraged to
try to correct the interference by one or more of the following methods:
•
Reorient or relocate the device.
•
Increase the separation between the device and the receiver.
•
Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the environment. Please turn off all electrical products when
they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power
when not in use. Thank you!
Document Version: An updated version of this document may be available online. Please check
www.obsidiancontrol.com for the latest revision/update of this document before beginning installation and use.
Date Document Version Note
10/31/19 1 Initial release.
11/26/19 1.5 Update specifications
12/6/19 2.0 Add POE
12/9/19 2.5 Unit weight increased to 1.82Kg