30
www.Observint.com
To configure a capture schedule for a camera channel:
1. Open the
Channel
drop down list at the top of the menu and select the channel you want to configure.
2. Click on one of the capture modes listed to the right of the matrix (Normal, Motion or PIR).
3. Drag the mouse linearly or diagonally across an area of the matrix where you want to enable that capture mode. To disable a
capture mode on the schedule, select the mode you enabled, and then drag the mouse across the area you want to disable.
4. Select a different mode, and repeat the method in step 3 above. Capture modes cannot overlap.
5. When finished setting up the schedule, click
Apply
to activate it. You can also click
Copy
to use the same schedule for other
camera channels.
6. Repeat steps 1 through 5 above for each camera in the system.
SECTION 4: RECORD
Summary of Contents for R4
Page 6: ...vi www Observint com NOTES...
