3
2 Megapixel Indoor/Outdoor IR Bullet Camera User Manual
SECTION 1: INTRODUCTION
NOTES:
•
Setup monitor and controller port
: Open the cap on the underside of the camera, then insert the mating service monitor
and controller jack into the plug.
•
Focus / zoom controls
—
To widen the viewing angle, turn the zoom screw to “W”.
—
To narrow the viewing angle, turn the zoom screw to “T”.
—
To adjust the focus, turn the focus screw to “N” or “∞” as needed.
•
RS-485+ and RS-485–
: Connect to an external RS-485 controller.
•
12 Vdc Power Connector:
12 Vdc, center positive
•
Video output
: HD-SDI output to DVR or surveillance monitor with high definition video functionality.
1.1.1 Setup monitor and controller cable
Use the setup monitor and controller device to monitor video for directional setup and configuration setup through the on-screen
display (OSD) menus.
Connector to
service port
Video out to
setup monitor
OSD controller
1.2 What you need
To install the camera you will need:
•
Power source
•
Setup monitor
•
Tools for mounting the camera
Summary of Contents for Black BLK-HDC10IR
Page 6: ...vi...
