7
2 Megapixel Indoor/Outdoor IR Bullet Camera User Manual
SECTION 3: CONFIGURATION SETUP
3.3 EXPOSURE
To open the EXPOSURE menu,
rock
the joystick down (or up) to highlight EXPOSURE, then
press
the joystick down (set, select).
•
BRIGHTNESS
: Adjust brightness level: 0 (dark) ~ 20 (bright) steps
•
LENS
: DC / MANUAL
•
SHUT SPEED
: Can be set in AUTO or MANUAL: AUTO / 1/30 (25), 1/60 (50), 1/120 (100), 1/240, 1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/16000,1/30000, 1/60000 s
•
FLICKERLESS
: Set to On or Off for best video performance. Normally OFF.
•
DSS
: Select maximum DSS (Digital Slow Shutter): OFF / x2, x3, x4
•
AGC
: Select Auto Gain Control OFF / ON
•
WDR/BLC
: Select WDR (Wide Dynamic Range) or BLC (Back Light Compensation). NOTE: When WDR is ON, ACE and DEFOG
function will not turn on.
—
WEIGHT : Adjust WDR level 0 ~ 3
•
BLC
—
AREA : Control BLC area according to light condition.
—
POS-X : Adjust the window X-Axis position
—
POS-Y : Adjust the window Y-Axis position
—
SIZ-X : Adjust the window X-Axis size
—
SIZ-Y : Adjust the window Y-Axis size
•
DAY&NIGHT
: Select Day&Night. The MODEL mode determines content of the DAY&NIGHT submenu.
D&N Model
—
AUTO / DAY / NIGHT / EXT
»
Delay : 0 ~ 255 second
»
BURST : OFF / ON
»
THRS : LOW / MIDDLE / HIGH. Select Day&Night change level. Higher level make the night mode changed in lower
illumination.
»
GAP : LOW / MIDDLE / HIGH: Select Day to Night mode change and Night to Day mode change.
Summary of Contents for Black BLK-HDC10IR
Page 6: ...vi...
