NEP160 User Manual
Copyright
–
2000 - 2011
Specifications subject to change without notice.
Page 23 of 24
OPTIONAL ANALITE PROTECTIVE SHROUD - NEP16SHRD
for ANALITE NEP260 probes.
INSERT
PROBE
190 mm
15 mm
Flow through holes
3 off M3 x 9 CSK SS screws @ 120°
to fasten to probe end.
OD38.2mm
FITTING
Insert the NEP260 probe into the shroud as shown.
Ensure end of probe is against internal stop at other end
of shroud. Rotate the probe in the shroud so as to give
the lowest possible output when in clear water.
Fasten the M3 screws onto the probe end.
(Do not over tighten).
Re-zero the instrument with the shroud fitted.
18 mm
