EN
11
EN Mounting and installation
instructions
Product description MCF 35-1+FS-440
Figure
1
:
Single pole lightning current arrestor type 1
1
for
lightning current equipotential bonding of power sup-
ply systems acc . to IEC 62305 . Encapsulated, non
extinguishing spark gap arrestor for inside use (e .g .
distributor housings) . In case of an error, the integrat-
ed disconnector unit interrupts the power supply,
shown by a visual indicator
5
as well as remote sig-
nalling with potential-free changeover contact
2
(see
also fig .
2
) . Connection to the L-conductor via cable
lug (see also fig .
3
) .
Scope of delivery, see fig .
1
:
1
Lightning current arrestor MCF 35-1+FS-440
2
Connector for remote signalling
3
Conductor connection set
4
Heat-shrinkable sleeve
Product description MCF-MS-P3
Figure
6
:
3 x MCF 35-1+FS-440, pre-assembled on mounting
plate . Incl . 2 bolts M8 x 16 for wall mounting, 3 bolts
M8 x 25 for mounting on bus bar, as well as nuts and
washers for earth connection, see fig .
6
2
.
Summary of Contents for MCF 35 Series
