59 | EN
Screw-on cable tray systems
Mounting
5 8 2
Mounting the cover with turn buckle
Turn buckles are either pre-mounted at the factory or can be mounted at
a later date in the case of unperforated covers. Depending on the type,
the turn buckle is screwed or riveted to the cover. In both cases, the
holes must be pre-drilled in the cover. The cover is mounted on the cable
tray using pre-mounted turn buckles in the same manner as with those
installed at a later date.
Mounting the turn buckle
B
B
DRL = B 27 mm
DBKR = B 27 mm
WDRL = B 38 mm
WKLD = B 58 mm
Ø 16,5 mm
Fig 75:
Pre-drill the cover
1. Pre-drill the cover. Distance B from the edge dependent on cover
type.
2. Insert the turn buckle button through the hole in the top of the cover.
DRL H S FT
DRL H S A2
13 mm
Pozidriv PZ 2
10 Nm
Fig 76:
Screwing on the turn buckle
3. Screw the turn buckle and hexagonal nut on the underside of the
cover with the washer and turn buckle button.
