OBID
i-scan
®
HF
Installation
ID ISC.PRH200
FEIG ELECTRONIC GmbH
Page 20 from 37
M31210-2e-ID-B.docx
4.4 Wi-Fi Interfaces
The Reader has a built-in wireless interface according to the IEEE 802.11 b/g /n standard and can
be configured in "Access Point" or the "Client Mode". The encryption protocols WEP / WPA /
WPA2 are supported.
The Reader on delivery or factory setting is configured as "Access Point" and generates its own
wireless network with the name (SSID) "PRH200" without encryption. The wireless interface of the
corresponding PC or laptop must be configured to "Client Mode" and DHCP "ON".
The reader default settings of the Wi-Fi interface are:
Parameter
Default setting
SIDD
PRH200
Password
-
DHCP
ON
Encryption
OFF
Mode
Access Point
Table 4: Default configuration of the reader Wi-Fi interface
Network
Address
IP-Address
192.168.1.1
Subnet-Mask
255.255.0.0
Port
10001
DHCP
ON
Table 5: Default configuration of the reader (Wi-Fi) Ethernet Interface
Note:
•
The Reader has a TCP/IP interface with DHCP that is turned on at the factory.
•
It is recommended to configure a new network name (SSID) and the encryption ac-
cording WPA/WAP2 after commissioning.
•
The minimum WPA2 encryption key length is 8 characters.
