OBID
i-scan
®
HF
Installation
ID ISC.PRH200
FEIG ELECTRONIC GmbH
Page 13 from 37
M31210-2e-ID-B.docx
4
First Wi-Fi connection with the Reader and scanning transponder
Before first use, the battery pack should be charged. See
3.2 Charge the battery
. The battery pack
must be connected to the charger. The charging will take 2-4 hours. The battery is fully charged
when the green LED remains lit on the power supply.
To configure the Reader you will need the software tool ISOStart Version 9.07 or higher on a
personal computer running under Microsoft
®
Windows
®
with Wi-Fi interface The service tool can
be downloaded from the Download Area of the FEIG Homepage
www.feig.de
.
The delivered reader is set on to the factory default settings and works as a "Access Point" and
generates its own wireless network with the name (SSID) "
PRH200
" without encryption. The wire-
less interface of the corresponding PC or laptop must be configured to "Client Mode" and DHCP
"ON".
4.1 Connection in Access point Mode
No.
Step
Note
1.
Boot the Computer boot
with Wi-Fi on.
2.
Adopt the battery pack
plug into the slot on the
reader. The battery pack
clicks into place.
3.
Reader ON: Short press
on Power-ON Button.
