OBH Nordica Ultrablend Boost LH985AS0, Instructions For Use Manual

Page: 64 / 68

CLEANING
• Clean the jug immediately after use.
• For easy cleaning, you can use the Clean program:
• Put 150ml of water and 1 drop of washing up liquid in the jug. Press the
Clean button.
• An excess of washing up liquid creates more foam and consequently can
lead to overflowing. Finish cleaning the jug with the aid of a sponge.
• Rinse the inside of the jug and the lid under running water.
• If your appliance needs deep cleaning, you can use a mixture of warm
water and baking soda. Let it soak for few hours to help get it clean.
• Use a damp cloth to clean the motor unit (D). Dry it carefully.
• The detachable parts (lid, lid cap, measuring cup) can be cleaned with
a sponge and hot soapy water. You can also use the brush to clean the
inside of the jug.
Caution:
• Ensure that no food or liquid is left in the jug; the jug is not meant for
storing food in the refrigerator or freezer.
• To clean the outside of the motor unit and the walls of the jug, use a damp
cloth.
• Do not immerse the appliance in water (neither the motor unit nor the jug
base). Never put the motor unit (D) under running water.
• The jug, lid cap must not go in the dishwasher.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
Problems Causes Solutions
Appliance does not
work
The plug is not connected.
Connect the appliance to a
socket with the same voltage as
indicated on the rating plate of
the appliance.
The blender jug is not positioned
correctly on the motor unit or the
jug and lid are correctly in place
and are not locked onto the motor
unit.
Check that the blender jug and
the lid are positioned properly
on the motor unit as explained in
the instructions.
Appliance, keypad or program not
responding
Unplug the appliance, wait for 1
minute and plug in again.
In case of overheating
Switch the appliance off using
the start/stop button, unplug
and leave it to cool down for
approx.15-20 minutes.
Overflowing
Reduce the quantity of the
ingredients processed.
The appliance
stopped while in use
Overload or overheating
Switch the appliance off using
the start/stop button, unplug
and leave it to cool down for
approx.15-20 minutes.
Reconnect the appliance to
the power supply and resume
blending.
64