Trooble shooting
Problem
Cause
Solution
Buttons
+
flashing
+ led
lighted
Preheating not respected.
Switching “ON” of the
appliance or starting an
automatic cooking cycle with
food between plates. The
manual mode is automatically
activated.
• 2 possible options:
- choose the temperature setting by
pressing the button
and then
press OK. Allow to cook, but you
must monitor the cooking (manual
mode). Temperature can be adjusted
by
button.
- Open completely the appliance,
remove the food, close the appliance
properly, select a cooking program and
press OK. Wait until end of preheating
(Preheating indicator lighted fix).
After closing the appliance with food
between plates, the appliance turns
itself to manual mode with flashing
+
+
discontinue
bip then after few seconds, it heats in
manual mode under 270°C
Preheating time not
completely done. Grill has
been opened and food
inserted on plate before end
of preheating.
Allow to cook, but you must monitor
the cooking because it is in manual
mode. Temperature can be adjusted
by
button.
or
Open the appliance, remove the food,
close the appliance properly, and wait
until end of preheating (Preheating
indicator lighted fix).
The appliance stops during the cycle of
preheating or cooking.
The appliance has been
kept open for too long while
cooking.
The appliance has been idle
too long after the end of
preheating or keep warm.
Unplug the appliance and wait few
minutes.
Plug again your appliance and switch
ON.
The 6 indicator lights flashing
+ one of the
button flashing
+ discontinue bip
Appliance failure.
Unplug the product and contact your
customer service.
The appliance no longer beeps
After the preheating , I have put my
food on the grill but cooking cycle does
not start.
The indicator stays on
and
button flashing
Your food is thicker than 4
cm.
Food must not be thicker than 4 cm.
You have not completely
opened the grill to place the
food.
Completely open the grill then close it.
Not sensing the food. The
food thickness too thin, “OK”
is flashing.
Confirm the start of the cooking by
pressing the
button.
The 6 indicator lights flashing
+ one of the
buttons
flashing
+ discontinue or continue bip
Appliance failure :
Appliance stored or used in
a room that is too cold.
Appliance over heating.
Unplug the appliance and wait few
minutes.
Plug again your appliance and switch
ON.
If the problem persists, contact your
Customer service.
94
95
GO706D15_optigrill initial_SB_0917.indd 94
2017-12-20 15:35:29
