OBH Nordica Legacy 2401, Instructions Of Use, Page: 27 / 30

Automatic switch-off
The coffee maker is equipped with a switch-off function that automatically
switches off the appliance after 40 minutes.
Cleaning and maintenance
Switch off the coffee maker, unplug and let the coffee maker cool before
cleaning. Remove any used coffee filter and clean the coffee maker with a
damp cloth and wipe with a soft, dry cloth - never use scouring powder or a
sponge! Never immerse the coffee maker in water or keep it under running
water. The glass carafe and the lid as well as the filter funnel should be
washed by hand as they are not dishwasher proof.
NOTE!
If the coffee maker is used in places where there is a risk of frost
(caravans, summer cottages etc.) make sure to empty the water tank
COMPLETELY (turn the appliance upside down). This will also prevent
damage to the coffee maker in case of any remaining water freezing.
Remember always to empty the coffee maker if it should not be used for a
certain period of time.
Descaling
An acrid and bitter taste often indicates that the coffee maker needs
descaling. If the brewing time prolongs considerably or if the coffee maker
is “sizzling”, this is a clear indication that the appliance needs descaling.
We recommend that you descale the coffee maker as soon as the
descaling indicator starts flashing or even more frequently if you live in an
area with hard water. Use a mixture of household vinegar and water, or
alternatively citric acid and water for descaling.
Descaling with household vinegar:
1. Fill water in the container up to the 4 cups marking.
2. Add acid to the 6 cups marking.
3. Switch on the maker and let 2/3 of the solution pass through.
4. Switch off the maker and let it rest for about 15 minutes.
5. Switch it on again and let the rest of the solution pass.
6. Finally, let the appliance boil with clean water 2 or 3 times.
7. Repeat the procedure if normal brewing time is not obtained.
8. Do not use other descaling methods.
Descaling with citric acid:
1. Fill water in the container up to the 10 cups marking.
2. Add 60 g of citric acid.
3. Switch on the maker and let 2/3 of the solution pass through.
4. Switch off the maker and let it rest for about 15 minutes.
5. Switch it on again and let the rest of the solution pass.
6. Finally, let the appliance boil with clean water 2 or 3 times.
7. Repeat the procedure if normal brewing time is not obtained.
8. Do not use other descaling methods.
27
2401_2402_2403_CF_UVN_1214.indd 27 2015-01-21 09:33:21