OBH Nordica Legacy 2401, Instructions Of Use, Page: 26 / 30

Brew twice without coffee before use. Let the water run through and pour
out the water. Rinse the glass carafe and repeat the procedure in order to
completely clean the coffee maker. NOTE! Always use clean, cold water.
Coffee brewing
Lift the lid and fill the water tank with the amount of water you want –
but do not exceed the Maximum marking (10 cups/1.25 litre.) See the
marking on the outer side of the water tank for filling.
Please note that the amount of coffee will always be a little less, since the
coffee grounds absorb some water. Put the glass carafe on the heating
plate and make sure that the glass carafe is correctly positioned in order
that the drip stop is activated by the lid of the glass carafe.
Open the lid to the filter unit and insert a coffee filter (1x4) in the
filter funnel. Add the amount of coffee you want in the filter – approx. 1
measuring jug a cup. Remember that the lid of the filter unit should be
closed in order to switch on the coffee maker.
Plug the appliance and switch on the coffee maker by means of the ON/
OFF button, and the white signal lamp around the switch will go on to
indicate that the brewing is on. When the brewing is done, the signal lamp
changes to red.
The heating plate under the glass carafe gets very hot. Remember
always to switch off the coffee maker, when the carafe has been
emptied or when you no longer want to keep the coffee warm. For
hygienic reasons we recommend always to remove the used coffee filter
from the funnel after brewing.
Anti-drip function
This coffee maker has an automatic anti-drip function that prevents coffee
from running through the filter funnel, if the carafe is removed from the
heating plate.
This means that the glass carafe can shortly be removed from the coffee
maker during brewing. It is important, however, to put back the glass
carafe on the heating plate within 30 seconds. If not, the coffee will
overflow.
Descaling alert
After about 40 brew processes, the lamp in the circular window on top of
the on/off button and the signal lamp surrounding the on/off button will
start flashing. This means that it is time to descale the coffee maker. If you
live in an area with hard water, descaling may be needed more frequently.
Always descale the coffee maker as per the instructions in section
‘Descaling’.
26
2401_2402_2403_CF_UVN_1214.indd 26 2015-01-21 09:33:21