OBH Nordica Grand Prix, Instruction Manual

Page: 36 / 44

Before use
Remove the packaging material, stickers and similar from the appliance. Set the
thermostat at the max temperature according to the instructions given in “Steam
ironing” and iron on a towel or similar a few minutes to remove any possible
impurities from the soleplate. Please note that it is normal that a special smell
may occur from the iron the first time it is heated. This will disappear within short.
There may even be particles emitting from the steam holes on the soleplate the
first time you use the iron, which is quite normal.
When the steam station is activated, you may hear a pumping sound from the
appliance. This is because water is being pumped into the steam generator.
Functions of the appliance (see illustration on page 3)
1. Soleplate
2. Iron
3. Handle
4. Steam button
5. Temperature knob
6. Signal lamp
7. Release button
8. Front support hook
9. Thermal insulating cushions
10. Rear support hook
11. Steam generator
12. Control panel
13. Cord clips
14. Locking pin
15. Cord winding groove
16. Water tank
17. Release buttons
18. Feeding lid
Temperature knob (see illustration on page 3)
a. Minimum setting
b. Maximum setting
c.
•••
setting for cotton, linen (140-210°C)
d.
••
setting for wool, silk (100-160°C)
e. • setting for synthetic fabric (70-120°C)
Control panel (see illustration on page 3)
1. Signal lamp
2. Indicator for descaling
36
37
2131_IDV_UVN_0413.indd 36 2013-07-04 14:01:18