70
•
Unplug from the wall outlet.
•
Set the steam selector at position “0” (closed).
•
Fill the water tank to the MAX marking.
•
Position the iron vertically on its heel.
•
Plug the switch to a wall outlet. Press the temperature setting
button until DENIM is displayed.
•
Let the iron warm up and wait until the temperature indicator
in the display is constantly on and you hear a beep signal.
•
Unplug from the wall outlet and hold the iron horizontally
over a sink.
•
Press the “SELF-CLEAN” button and keep it pressed during
the entire process. The button may be a little slow, but this
does not mean that the iron is defective.
•
Steam and boiling water will now evaporate from the holes
of the soleplate. Impurities and limestone will be flushed out.
•
Move the iron forwards and backwards until the water tank
is empty.
•
After descaling, release the self-cleaning button. Let the
soleplate cool off and wipe it with a cloth.
Repeat the self-cleaning procedure until there are no further
impurities.
IMPORTANT! Never use the self-cleaning button during
ironing.
Cleaning and maintenance
In case fabric finish residues should melt on the soleplate, these
can be removed by using a cloth soaked in a vinegar/water
solution. Dry with a soft cloth. There are various products
available that can be used as cleansing agents for the soleplate.
We have not tested all these products and a possible use of such
products is therefore the user’s responsibility. Damage to the
soleplate or the iron due to the use of a cleansing agent is not
covered by the warranty.
2119_IDV_1012.indd 70
2012-11-19 15:07:22
Summary of Contents for Formula 500i TS
