OBH Nordica Formula 500i TS, Manual

Page: 64 / 76

64
If the iron symbol on the label is crossed, the garment
cannot
be ironed.
If there is no indication of the temperature to be used for the
garment, start at the lowest temperature and carefully make a
test.
Always start at a part that will not be visible. In case of mixed
kinds of fabrics, such as polyester/cotton, always iron at
a temperature corresponding to polyester - i.e. the lowest
temperature.
If the garment has prints, sequins etc. special care is required as
such materials may melt. Consequently, the above instructions
are not valid for such materials. We recommend that fabrics that
have a tendency of becoming shiny are ironed on the reverse
side. If ironed on the upper side, do it carefully and always keep
the iron moving.
Filling with water
Position the iron upright and make sure that the appliance has
been unplugged before filling of water. Set the steam selector at
“0” (no steam) and open the lid of the inlet. Pour water slowly by
means of the delivered beaker until the water reaches the MAX
marking on the water tank (never exceed the MAX marking).
Close the lid.
Distilled and demineralised water as well as softening agents
must
not be poured in the water tank, as such liquids may
damage the metallic parts of the iron and discolour the fabric.
2119_IDV_1012.indd 64 2012-11-19 15:07:21