31
OBH Nordica Steam Iron Formula 400i RS
Before use
Before you use the steam iron for the first time, please read the instruction manual carefully
and save it for future use.
General description
N
L
M
G
J
I
H
F
E
D
K
C
B
A
A. ”Soft touch” grip
B. Burst of steam button
C. Spray button
D. Steam selector
E. Water filling inlet
F. Spray nozzle
G. Water tank (400 ml) with indicator light
H. Ceramic coated soleplate with button groove
I. Temperature control
J. Temperature light
K. Self-clean button
L. Indicator light for current switch and safety stop function
M. Heel (rest position)
N. Core with flexible core clip
Wipe the soleplate with a damp cloth to remove any residue before use. Fill the water tank
with water and empty it to make sure that there are no impurities left in the water tank. Empty
the water tank by opening the water filling inlet and turn the iron upside down over a sink to
let the water run out.
How to use the steam iron
Setting of temperature
Always follow the label and ironing instructions on the garment. The label shows an iron and
the number of dots indicates the right temperature. If the iron on the label is crossed, this
means that the garment cannot be ironed.
If there is no instruction as to the ironing temperature, start with the lowest possible tempera-
ture and carefully make a test. Always start by ironing a part that will not be visible. In case of
mixed kinds of fabrics, such as polyester/cotton, always iron at a temperature corresponding
to polyester – i.e. the lowest temperature. The following table can be used as a guideline in
case of doubt:
