![background image](http://html1.mh-extra.com/html/obh-nordica/bjorn-axen-tools-keratin-touch/bjorn-axen-tools-keratin-touch_instruction-manual_3221585020.webp)
10. The appliance must not be immersed in water or
any other liquids. Never use the appliance with
humid hands and do not position the appliance on
a wet or humid surface.
11. Always unplug the appliance from the mains
supply immediately after use, if the appliance is
used in a bathroom, as water presents a hazard
even when the appliance has been switched off.
12. Always examine appliance, cord and plug
for damage before use. If the supply cord is
damaged, it must be replaced by the manufacturer
or his service agent or a similarly qualified person
in order to avoid a hazard.
13. For additional protection we recommend the
installation of a residual current device (RCD) with
a rated residual operating current not exceeding
30 mA. Ask your installer for advice.
14. The appliance is for domestic use only.
15. If the appliance is used for other purposes than
intended, or is it not handled in accordance with
the instruction manual, the full responsibility for
any consequences will rest with the user. Any
damage of the product or other things is not
covered by the warranty.
You are welcome to visit our website www.obhnordica.se for inspiration and
further information about our products.
How to use the appliance
Make sure that the hair is completely dry and comb it well. If the hair is very
long or thick, it would make it easier if you use the delivered hair clips to
separate the hair.
Plug the appliance to a wall outlet and you will hear a beep sound. Activate the
plate straightener by pressing the switch on top of the appliance and you will
hear one more beep and the temperature button (thermometer icon) next to
the lower plate flashes. From the factory, the temperature is set at
150°C, but
is easily adjusted by pressing the temperature button in the display until the
3009_CS_UVN_1014.indd 20
2015-01-07 10:06:21