head. Start clipping at the neck and work your way upwards in light movements
and continue in the same way all over the head. Be extra careful when cutting
around the ears. Turn off the appliance by means of the switch once you have
finished.
Cutting by means of fingers / comb
The fingers and / or a comb can be used if hair length of over 13 mm is
desired.
• Remove the comb from the clipper by pulling out the snap fitting and lifting
off the comb.
• Lift up a strand of hair using a comb or hold the hair between your fingers
so that the hair which is to be cut sticks out above the fingers.
• Cut the hair with the hair clipper. Continue in this manner until the desired
length is reached.
• Comb regularly in order to remove loose hair and to see the results.
Cleaning and maintenance
• Always switch off the hair clipper and unplug the adapter’s connector before
cleaning.
• Remove any accessories and U or T-blade trimmer from the hair clipper.
• Use the cleaning brush provided in order to remove hair from the U /
T-blade trimmer. These can also be rinsed in water.
• Oil the U / T-blade trimmer regularly with some drops of the oil supplied.
Wipe off excess oil with a dry cloth.
• Clean the appliance housing with a damp cloth. The appliance must not be
exposed to water or other liquids.
• Keep the hair clipper and accessories in the storage case supplied.
Environmental considerations regarding disposal of
batteries
When replacing batteries it is necessary to consider the environment.
Used batteries must never be disposed of together with household
waste but must be disposed of at designated collection points.
Batteries must be removed before the unit is discarded. You must
also make sure that you do not let the batteries get too old and low in
power, as there is a risk that they will start to leak. Check the expiry
date for the batteries and remove them before they get too old.
Disposing of the used appliance
By law, electrical and electronic equipment must be collected for the
recycling of components. Electrical and electronic equipment marked
with the waste management symbol must be disposed of at a municipal
recycling point.
32
33
5595_CF_1216.indd 33
2017-01-16 11:06:48