4. Signal light indicates charging
5. Mains
6. Adapter
7. T-blade trimmer
8. U-blade trimmer
9. Detail Trimmer
10. Nasal and ear hair trimmer
11. Beard comb
12. Shaving head
13. Cleaning brush and oil
14. Combs for U-blade trimmer, 3 in no. - 3 mm, 4 mm, 6 mm
15. Combs for U-blade trimmer, 4 in no. - 3 mm, 6 mm, 9 mm, 12 mm
16. Charging Station
17. Storage bag (not shown)
Before use
Make sure the batteries are fully charged before use if the clipper is to be used
without an adapter.
Charging the battery
1. Ensure that the clipper is turned off during charging.
2. To charge the clipper without inserting it in the charging station, insert the
adapter’s connector in the mains supply at the short end of the clipper.
Then connect the adapter plug into a wall socket. Battery charging
commences and the symbol is displayed.
3. If you prefer to charge the clipper in the charging station, press the
adapter’s small connector on the bottom of the charging station and
then place the clipper in the charging stand so that it connects to the
connector. Put the plug into the wall socket and charging begins.
When the battery is fully charged (after 90 minutes), you can cut cordlessly
for about 45 minutes (depending on hair type). Battery life is not harmed by
charging a short time but it should be avoided to let the battery discharge
completely.
Use with adapter
Make sure the appliance is turned off. Insert the adapter’s connector into the
power port on the clipper and then plug the adapter plug into a wall socket. If
the device does not start, the battery must be charged for a while before it can
start.
Use
• Make sure the unit is clean, the battery is fully charged or connected to the
adapter.
• Hair should be clean, well-groomed and dry (wet hair makes it harder to
move the comb through the hair).
• Select the Trimmer / accessories to suit your purposes:
- T-trimmer blade - 40 mm wide trimmer for sharp outlines.
30
31
5595_CF_1216.indd 31
2017-01-16 11:06:48