OBH Nordica Hand-held Blender
Before use
Before the blender is used for the first time, please read the instruction manual carefully and
save it for future use.
Wipe off the blender with a dampened cloth before use.
The blender purees, blends, wipes and chops food fast and easy. The
ingredients to be blended, pureed or chopped shall be cut in small
pieces in order to achieve the best and most homogenous result.
The blender can be used in a jug, a measuring jug or similar, but can
also be used in any bowl, container or pot. When used in a bowl or a
pot, be careful to avoid splashing. When you use the blender in a pot,
remove the pot from the stove.
description
A. Quick-break switch two speeds (I and II)
B. Motor
C. Removable blender shaft
How to use the hand-held blender
The blender is suitable for preparing e.g. sauces, soups, dressings, pesto, diet food and baby
food, cocktail sorbet etc.
Put the removable blender shaft on the motor part by carefully turning the blender shaft
towards ”closed padlock” (clockwise). When the “closed padlock” on the stick blender and the
arrow on the engine part align, the blender is mounted. Plug the appliance in the outlet and
switch on the socket. Make sure that the wire is free.
Immerse the blender into the ingredients before activating the button in order to avoid
splashing. Move the blender carefully upwards and sideways in slow, rotating movements.
A light pressure on the button will activate speed 1 and a little harder pressure will activate
speed 2.
When you release the quick-break switch the motor will stop. Press the button at intervals
of about 10 seconds, release it for a moment and restart. Continue in this way until the
ingredients have got the right consistency.
The hand-held blender works very fast – most ingredients will be ready in less than a minute
– and it is therefore a good idea to use it in short intervals, especially in the beginning, where
you are not yet used to the appliance.
When finished, pull out the blender from the jug or the bowl, switch off and unplug the
appliance from the mains supply.
Demount the blender by turning the blender towards the ”open padlock” (counter-clockwise),
and rinse the knife in running water. For cleaning the knife use a soft washing-up brush and
A
B
C
15
