24
For use at home or office
OBH Nordica’s Shiatsu massage cushion incorporates a unique strapping system which allows
you to fasten it to almost any chair by tightening the Velcro fastening around the backrest. As
well as the strapping system to secure the cushion to the back of most chairs, the massager
also has an adjustable seat which enables use on most soft arm chairs and sofas. Simply
adjust the strap length using the buckle under the seat to achieve the desired angle to fit
your chair/sofa and the cushion can be used effectively at virtually any angle. By all means,
you can also just put the cushion in a chair or sofa if you prefer. The massage cushion is not
intended for use in cars and may not be used lying down.
Please note:
The massager is not recommended for use on wooden surfaces as the slipper
may damage the wood. Caution is also recommended when using on upholstered furniture.
Use some kind of thicker textile as protection.
Switch (8)
Connect the appliance. To turn on the massage cushion functions, press the switch. The pilot
lamp lights. To switch off the massager, simply press the button again. The pilot lamp will
blink while the dual massage mechanism returns to its lowest point and then it will turn off.
DEMO (1)
For a brief demonstration of the features of the Shiatsu massage cushion, press the DEMO
button. The unit will complete one cycle combining Shiatsu, rolling and vibration massage.
Once complete, the unit automatically turns off. The LED light will blink to indicate the active
functions.
Adjusting the massage heads (2)
To customize the massage to your height, press the button at the highest desired position.
The massage heads will not travel higher than that position for the duration of the massage. To
deselect the feature press the button a second time. The massage will return to its full travel.
SHIATSU massage (3, 4, 5)
Shiatsu is a Japanese massage technique which means a deep kneading circular massage.
Choose from 3 preset programs where the Shiatsu massage travels up and down in a specific
area of the back. To select a program, simply press the button and the pilot lamp will illuminate.
To deselect, press the button again and choose another program.
SHIATSU spot massage (6)
While the unit is in Shiatsu massage mode, press either up or down button to activate the
spot massage. You may then adjust the mechanism position by pressing corresponding button
until the desired position is reached. When you release the button the massager stops at
desired setting.
Vibrating massage (7)
Adds vibrating massage to upper legs/thighs.
ROLLING massage (9, 10, 11)
Rolling is like two hands or thumbs working up and down along your spine. Choose from 3
preset programs where the Rolling massage travels up and down in a specific area of the back.
Whole back, upper back and lower back. To select a program, simply press the button and
6092_MB_0611.indd 24
2011-06-13 08:47:45