36
37
Day
- Use the + and - buttons.
- Confirm by pressing the MODE button
Language
- Use the + and - buttons.
- Confirm by pressing the MODE button
(English, German, French, Italian, Dutch, Spanish,
Danish)
Confirm by pressing the MODE button in order to proceed to the next setting.
If you do not want to set the flashing segment, press the MODE button to
proceed to the next segment. Remember to press the MODE button after the
last setting to confirm.
Alarm setting
The alarm clock is equipped with an alarm that is set in the following way: Note
that all settings should be made within 30 seconds. If not, they will be lost.
1. Press the ALARM button at the back of the alarm clock.
2. Press the + button to set or disconnect the alarm. An alarm icon will
appear when the alarm function is on.
3. Keep the ALARM button pressed for 3 seconds and the number of hours
starts flashing.
4. Set the number of hours by using the + and - buttons.
5. Press the ALARM button once to confirm.
6. Set the number of minutes by using the + and - buttons.
7. When the alarm time has been set, press the ALARM button again to
confirm.
When the wanted time of alarm is there, the alarm will go on and the display
will be on for about 5 seconds. If it has not been switched off, the alarm will
sound for about 2 minutes and increase the sound level. Next, the alarm will
stop by itself and start again 24 hours later. However, you can also switch off
the alarm before it stops by itself by pressing whatever button (apart from the
SNOOZE button).
Snooze function
The clock comprises a snooze function that is activated by pressing the
SNOOZE button on top of the clock within the two minutes when the alarm
is on. Subsequently, the alarm will be repeated about 5 minutes later. The
snooze function will then be activated every 5 minutes until it is deactivated by
pressing any button.
Backlight
The backlight can be activated for 5 seconds by pressing the SNOOZE button.
4920_CS_UVN_0914.indd 36
2014-10-01 10:55:42
