Oberhauser Bau-Systeme FRTSTV, Installation Manual

Page: 4 / 19

3
1. General Information
•
The soil conditions for the structures should be leveled and load-bearing.
•
The electrical connection may only be carried out by a qualified electrician.
•
The completed photovoltaic project should be completely surrounded by a fence
to protect it from unauthorized access or damage by wild animals.
•
All packaging material must be disposed properly in accordance with legal and
technical regulations. See EN 378.
•
The mounting systems from Oberhauser serve exclusively as substructure for
installing photovoltaic modules and may only be used in accordance with their
structural analysis.
•
The photovoltaic modules may only be installed in accordance with the
manufacturer's instructions.
1.1 Designation of the individual parts
A = Ram profile C140 x 80 mm, Length according to requirements
B = Rafter profile C100 x 50 mm, Length according to requirements
C = Purlin C75 x 50 mm, Length according to requirements
D = Purlin connector
E = Hexagonal screw DIN 933 – M12 x 40, Material: A2-70 or 8.8
F = Washer DIN 9021 – 13,0 mm; Material: A2 – 70 or 8.8
G = Hexagonal nut DIN 6923 – M12; Material: A2 – 70 or 8.8
H = Module middle clamp
I = Module end clamp
J = Diagonal brace 50 x 50 x 5 mm; Material: Galvanised steel
1.2 Overview of required tools and auxiliary materials
Iron bars
Cordless screwdriver with torque limiter
Pencil
Inclinometer
Large angle approx. 2000 mm
Screw insert 6 mm
Ratchet with torque and socket wrench insert 19 mm