8
OPERATION
OPERATION
Interchangeable Feet
The rubber feet that come
attached to the tripod are good
for hard surfaces like hardwood
floors, pavement, or carpet that
you don’t want to damage with
spikes.
Spiked feet are good for soft
surfaces where some extra
security is needed, like grass or
dirt.
To exchange the rubber feet for
the spiked feet:
1. Unscrew the rubber feet from
the tripod legs.
2. Screw in the spiked feet.
3. Insert the large hex key through
the hole of each foot to tighten it
until it’s secure.
Use the twist locks to adjust the
length of the tripod’s legs.
To adjust the height of a leg,
loosen the lock by turning it a
half-turn clockwise, and position
the leg at the desired height. Turn
the twist lock counterclockwise to
tighten until secure.
For rapid deployment to maximum
height, simultaneously twist
Leg Length Adjustment
