14
Ballhead Operation (continued)
Tripod Operation
PANORAMIC BASE
The base of the ballhead can be
independently rotated 360°. The
base is controlled by loosening
the pan knob. (The smallest knob
at the base of the head.)
1. Twist the knob counterclockwise
to unlock the base.
2. Rotate the base to the desired
position, and then lock the base
by turning the knob clockwise.
Note: Degree markings on the base
of the ballhead can be used to
accurately set up panoramic shots.
LEG LENGTH ADJUSTMENT
To independently adjust the
height of each leg, do the
following:
1. Loosen the twist locks enough
so that the legs can be adjusted.
Note: Don’t over-loosen the twist
locks.
2. Adjust the leg to the desired
height.
3. Tighten the twist locks to
secure the leg in place.
OPERATION
