10
7. Retractable Spiked Feet*
6. Mounting the Head
The top plate on Oben tripods is
equipped with three set screws
which clamp against the base of
the tripod head to ensure effective
and secure locking of the head to
the tripod.
callouts
leg angle adj
center clm adj
attaching head
low angle adj
180°
A spike is built into each of the
tripod’s rubber feet. The rubber
non-skid feet are for use indoors or
on flat surfaces, while the spikes
are for soft ground, grass, sand,
and on uneven terrain. To extend
the spike, rotate the rubber pad at
the bottom of the foot clockwise
until the spike is fully exposed.
Turn the foot counterclockwise
to fully retract the spike into the
rubber foot. For CC-2441, see note
below.
*Model CC-2441 features a
removable rubber cap with a spike
beneath it on each tripod leg. To
exchange a rubber foot for a spiked
foot, simply pull the rubber cap
off the leg, exposing the spike
underneath. When a rubber foot is
desired, replace the rubber cap over
the spike.
oPErAtIon
