MI SERIES
– Manual (v1.7)
Obelux Oy, Kutomotie 6 B, 00380 Helsinki FINLAND
© Obelux Oy 2017 Technical information in this document is subject to change without notice.
Page: 23(28)
8.2 Replacing the glass cover
This section contains instructions for replacing a broken glass.
1. Disconnect power supply to the light head.
2. Open all four M6x20 stainless steel bolts on the top plate using a hex key 5.
3. When lifting the top lid make sure you disconnect the GPS antenna cable from the light head circuit
board.
4. Check that you don´t lose the four O-rings that are between the chassis and the lid.
