8. Fitting and removing the guard rail
Fit the guard rail by inserting it in the plastic mounts on both sides.
To remove the guard rail from the pushchair, press in the buttons on both
sides and pull the guard rail off away from the pushchair.
9. Adjusting the leg rest
To adjust the leg rest, press in the buttons on both sides and then adjust the
height.
Let go of the buttons again so that the leg rest clicks into place.
10. Fastening the harness
To fasten the harness, bring the top two plastic catches together and
interlock them.
Then insert the interlocked catches into the bottom part of the fastening.
Adjust the harness to a setting where the baby is held in the correct position.
11. Unfastening the harness
To open the harness, press the button on the side.
CAUTION:
Always use the shoulder harness and lap belt together.
7